L-Channel Stiffening Bar, Anti-Flex Bench & Table Top Stiffener | Black or White Powder Coat
A steel L-Channel that runs underneath a bench or tabletop and takes the flex out of it. The 50mm web hanging below the surface does the work, adding stiffness far more efficiently than thickening the top would.
Benches are where it earns its place. On a long bench it is close to essential: without one, the seat flexes and bounces when a few people sit down. This is about how the bench feels, not whether it holds. On our 25mm plywood the top is already strong and the bar is not there to stop it breaking. We fit one as standard to our own bench kits.
Bench sizing. A 180cm bench takes a 120cm or 150cm bar and stays solid with four people on it. A 150cm bench takes a 120cm or a 90cm. A 120cm bench needs it far less, though it still benefits from a 90cm bar when the legs sit right at the ends.
On tables, most people do not need one. Our 25mm 180cm dining table is more than stiff enough as it comes, and adding a bar makes only a slight difference, though some people appreciate it. Where it does earn its place is on tops longer than 180cm, or on a 180cm top in thinner wood. Both flex more, and the bar takes that out.
Versatile beyond benches and tables. Works equally well on cabinets, sideboards, and cupboards: anywhere a flat panel or thin top needs rigidity. Runs along the length of a single plank or panel; not designed for joining multiple planks together.
Installation is direct: position it underneath, drill through the round fixing holes, drive the screws. No marking out, no template. Works on any substrate the screws can bite into. Not for granite, glass, or thin metal without backing.
30×50mm L-section, 2mm wall, satin powder coat in black (RAL 9017) or white (RAL 9003). Ships with a pack of 19mm zinc-plated fixing screws, suited to indoor and sheltered use. The bar itself is fine outdoors; for exposed outdoor builds, swap the screws for stainless.
Original: $74.18
-65%$74.18
$25.96Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A steel L-Channel that runs underneath a bench or tabletop and takes the flex out of it. The 50mm web hanging below the surface does the work, adding stiffness far more efficiently than thickening the top would.
Benches are where it earns its place. On a long bench it is close to essential: without one, the seat flexes and bounces when a few people sit down. This is about how the bench feels, not whether it holds. On our 25mm plywood the top is already strong and the bar is not there to stop it breaking. We fit one as standard to our own bench kits.
Bench sizing. A 180cm bench takes a 120cm or 150cm bar and stays solid with four people on it. A 150cm bench takes a 120cm or a 90cm. A 120cm bench needs it far less, though it still benefits from a 90cm bar when the legs sit right at the ends.
On tables, most people do not need one. Our 25mm 180cm dining table is more than stiff enough as it comes, and adding a bar makes only a slight difference, though some people appreciate it. Where it does earn its place is on tops longer than 180cm, or on a 180cm top in thinner wood. Both flex more, and the bar takes that out.
Versatile beyond benches and tables. Works equally well on cabinets, sideboards, and cupboards: anywhere a flat panel or thin top needs rigidity. Runs along the length of a single plank or panel; not designed for joining multiple planks together.
Installation is direct: position it underneath, drill through the round fixing holes, drive the screws. No marking out, no template. Works on any substrate the screws can bite into. Not for granite, glass, or thin metal without backing.
30×50mm L-section, 2mm wall, satin powder coat in black (RAL 9017) or white (RAL 9003). Ships with a pack of 19mm zinc-plated fixing screws, suited to indoor and sheltered use. The bar itself is fine outdoors; for exposed outdoor builds, swap the screws for stainless.
